I'm not speaking from experience - just a suggestion. I started
using SuperGlue for mounting stamps - quick (like instant) and unless
it cracks in the cold I would guess permanent. Although I use foam
core it should still work on plexi. FIRST stamp your image on paper
(I prefer card stock, index card) so you can outline the finished
stamp incase the image is not even with the edges. Then glue the
stamp to the plexi. Then cut the image to the stamp edges and glue
it to the top of the plexi exactly over the stamp. I always cover
anything paper (log,FFC,foamcore) with the wide clear packaging tape -
even if has to be lap seamed. It keeps the paper 'clean' and adds
support. Just extend it over the plexi - might help with any rough
edges.

sewsowbizzy

>
> What would be the best way to mount the stamp, and hopefully the
picture as well?
>
>
> Music Woman

Hi Music Woman,
I've never used Plexi for mounting, but here is a tip for PZKut. If
you scrub the mounting side of PZ Kut with a wetted(with acetone)
paper towel you will find that it accepts adhesive much better. I
use Household Goop( very similar to Shoe Goo)when I mount my stamps
to wood. The problem I think you will find will be the clarity
required to get a good image through the plexi and glue. Your idea
sounds pretty cool but finding a good adhesive that has clarity and
good sticking power will be your biggest hurdle. Please let us know
if your concept works as I intend to use it if it does.

Don

Maybe this will help:


I've had my sig stamp, carved from MasterCarve though, on a piece of
Plexi for over 2 years now. I glued it with a regular hot glue gun
and in the 2+ years of gatherings, exchanges and stamping into boxes
I've only had to re-glue it ONCE. It makes a nice base for pressing.
My husband used a dremmel to cut the piece to fit my stamp and it
fits perfectly.



(letterboxingbee)
--Bev






--- In letterbox-usa@yahoogroups.com, Pam wrote:
> I'm new to this "mounting stamp thing." I used to use Mastercarve
in the 3/4 inch size, but now like PZ Kut since it's firmer and
cheaper. I was given some plexiglass from a local hardware store and
would like to mount a large stamp. If possible, I would like to put a
piece of paper, which depicts the stamp in between the PZ Kut and the
plexi.
>
> What would be the best way to mount the stamp, and hopefully the
picture as well?
>
> Fast responses needed, since the stamp is for a present which is to
be given out on Saturday morning.
>
> Thanks so much!
>
> Music Woman

If you want there to be something between and seen through the
plexiglass, go for 527. It's clear going on an dries clear-- I use it
for making marble magnets.

Glue the image to the back of your stamp. Wait to dry. Glue the
plexiglass to the image, making sure to press hard so all the bubbles
come out. Wait to dry. Voila.

I think I used this stuff to glue my pink eraser stamp to its wooden
backing, but it might have been plain white craft glue instead-- don't
totally remember.

--Stephanie

On Fri, 11 Feb 2005 12:22:21 -0000, letterboxingbee
wrote:
>
>
> Maybe this will help:
>
> I've had my sig stamp, carved from MasterCarve though, on a piece of
> Plexi for over 2 years now. I glued it with a regular hot glue gun
> and in the 2+ years of gatherings, exchanges and stamping into boxes
> I've only had to re-glue it ONCE. It makes a nice base for pressing.
> My husband used a dremmel to cut the piece to fit my stamp and it
> fits perfectly.
>
>
> (letterboxingbee)
> --Bev
>
>
> --- In letterbox-usa@yahoogroups.com, Pam wrote:
> > I'm new to this "mounting stamp thing." I used to use Mastercarve
> in the 3/4 inch size, but now like PZ Kut since it's firmer and
> cheaper. I was given some plexiglass from a local hardware store and
> would like to mount a large stamp. If possible, I would like to put a
> piece of paper, which depicts the stamp in between the PZ Kut and the
> plexi.
> >
> > What would be the best way to mount the stamp, and hopefully the
> picture as well?
> >
> > Fast responses needed, since the stamp is for a present which is to
> be given out on Saturday morning.
> >
> > Thanks so much!
> >
> > Music Woman
>
>
> Yahoo! Groups Links
>
>
>
>
>


--
Stephanie Bryant
mortaine@gmail.com
http://www.mortaine.com

There are a lot of nice suggestions here. One thing I have found is
that when I am mounting a stamp, I need to be careful. I live in a
cold mountain state and I used to use superglue to mount till I found
that it can shatter like glass when temperatures go around freezing.
I have since found that contact cement-or rubber cement-works well
for me. I put some on where I outlined the stamp before and then
coat the back of the stamp itself. Let both dry then apply together
and you will have a fast, strong bond that lasts in variable weather.

I'm not sure what effect it will have to glue a paper between the two
things. I imagine it might weaken it. If you were really determined
you could try a couple of pieces of plexiglass attached with the
image between and the stamp under that. I don't think I'm that
determined. One other option might be to use some of those newer
inks that are made to work on variable surfaces. I did a Christmas
project where I stamped some tiles with that special ink (it works on
glass, ceramic, wood, etc) and put something under to keep from
scratching and they made some nifty coasters tied up with a nice
ribbon. The ink took a bit longer to dry, but it has stayed on
well. I'll bet that would work well on plexiglass if you want to
stamp the image on like you would on wood. Just a thought!

Cadenza

It's not for a letterbox, so I don't think it will ever stay outside for very long :-)

We have Secret Stamping Sisters at a local stamp store (;-) for those who live near me know what store I talk about) and I carved a stamp as a present for my secret stamping sister.

Thanks to everyone for the great imput! I used the E6000 from Michaels crafts, and though it smells to the high heavens, it works GREAT! Thank goodness the smell goes away when it dries!

Music Woman
>
> From: "cadenza74"
> Date: 2005/02/11 Fri PM 08:28:41 EST
> To: letterbox-usa@yahoogroups.com
> Subject: [LbNA] Re: Attaching Plexi to PZ Kut
>
>
>
> There are a lot of nice suggestions here. One thing I have found is
> that when I am mounting a stamp, I need to be careful. I live in a
> cold mountain state and I used to use superglue to mount till I found
> that it can shatter like glass when temperatures go around freezing.
> I have since found that contact cement-or rubber cement-works well
> for me. I put some on where I outlined the stamp before and then
> coat the back of the stamp itself. Let both dry then apply together
> and you will have a fast, strong bond that lasts in variable weather.
>
> I'm not sure what effect it will have to glue a paper between the two
> things. I imagine it might weaken it. If you were really determined
> you could try a couple of pieces of plexiglass attached with the
> image between and the stamp under that. I don't think I'm that
> determined. One other option might be to use some of those newer
> inks that are made to work on variable surfaces. I did a Christmas
> project where I stamped some tiles with that special ink (it works on
> glass, ceramic, wood, etc) and put something under to keep from
> scratching and they made some nifty coasters tied up with a nice
> ribbon. The ink took a bit longer to dry, but it has stayed on
> well. I'll bet that would work well on plexiglass if you want to
> stamp the image on like you would on wood. Just a thought!
>
> Cadenza
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>

Thank you for all of your suggestions! I ended up using E6000 which can be bought at any Michael's Craft stores. It seems to bond as well as superglue! I hope it can hold up in cold winters, since I'm going to mount some of my larger letterboxing stamps next.

Music Woman
>
> From: "cadenza74"
> Date: 2005/02/11 Fri PM 08:28:41 EST
> To: letterbox-usa@yahoogroups.com
> Subject: [LbNA] Re: Attaching Plexi to PZ Kut
>
>
>
> There are a lot of nice suggestions here. One thing I have found is
> that when I am mounting a stamp, I need to be careful. I live in a
> cold mountain state and I used to use superglue to mount till I found
> that it can shatter like glass when temperatures go around freezing.
> I have since found that contact cement-or rubber cement-works well
> for me. I put some on where I outlined the stamp before and then
> coat the back of the stamp itself. Let both dry then apply together
> and you will have a fast, strong bond that lasts in variable weather.
>
> I'm not sure what effect it will have to glue a paper between the two
> things. I imagine it might weaken it. If you were really determined
> you could try a couple of pieces of plexiglass attached with the
> image between and the stamp under that. I don't think I'm that
> determined. One other option might be to use some of those newer
> inks that are made to work on variable surfaces. I did a Christmas
> project where I stamped some tiles with that special ink (it works on
> glass, ceramic, wood, etc) and put something under to keep from
> scratching and they made some nifty coasters tied up with a nice
> ribbon. The ink took a bit longer to dry, but it has stayed on
> well. I'll bet that would work well on plexiglass if you want to
> stamp the image on like you would on wood. Just a thought!
>
> Cadenza
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>